Rust Resistant Greenhouse Accessories Aluminum Film Lock Profile With Wire

Aluminum Film Lock Profile With Wire For Agriculture Greenhouse

Product Description

The greenhouse card slot is also called the greenhouse film slot, galvanized card slot, film slot, greenhouse card slot, U-shaped card slot, card slot spring, dovetail slot, etc. Hot-dip galvanized steel is used as raw material and is scientifically rolled by equipment.It has good anti-corrosion performance, scientific molding, large wind resistance, smooth surface and no damage to the film. The thickness is 0.mm, 0.7mm, 0.8mm, 1.0mm, 1.2mm. The width of 30mm and the height of 12mm can snap double springs to increase the wind resistance, the degree is 4 meters to 6 meters, and can also be produced according to user requirements.

1. The groove depth is about 11 mm, and the film, insect net, sunshade net, etc. can be simultaneously stuck in the double-layer snap spring.

2. The slot width is 30 mm, which is about 2 mm wider than the ordinary card slot.

3. The lengths are 2 meters and 4 meters respectively. Please contact us for shipping costs and payment methods.

4. The material is cut and pressed by hot-dip galvanized steel, and the amount of zinc is customized according to the greenhouse industry standard. Normal use is about 10 years.

Pay Attention To

1. Frequently check the connection of various fixtures. When loose, wedges should be immediately tightened and re-fixed. If the film is broken, it should be replaced or glued in time.

2. In case of strong winds, all ventilation openings should be closed in time, and the pressure film line should be tightened. When it snows, clear the snow in time to prevent overload. If necessary, you can add some temporary braces to stand against the middle of the arch pipe. In case of catastrophic weather, someone must be responsible for the care of the greenhouse.

3. If all kinds of clamps fall off, are damaged, and they are lost, please contact the factory in time to buy accessories. Be sure to fill in the name and number of the timetable when purchasing.

4, after the greenhouse does not need to be dismantled, all parts are classified and cleaned up. Store in a dry, ventilated place indoors to prevent corrosion and deformation from affecting the service life.